To avoid costly roofing repair work, you’ll need to perform regular cleaning and maintenance of your home’s gutter system. And with fall here, the best time to perform this task is now. Follow these useful tips to get started.
1. Get Rid of Accumulated Dirt
For gutters to function effectively, you should clear the passage of leaves and debris. A clogged drain can cause a lot of damage to the roofing system and the home in general.
Overflowing gutters may pull the gutters loose. To prevent such an incident from occurring, you should get rid of anything in the gutters that shouldn’t be there, at least once a year. Make sure you do this before it starts raining heavily. Alternatively, you can get a gutter guard protection system.
2. Check the Slopes
Odds are your home gutters are not perfectly positioned, and this can affect the efficiency of the system. Check the angles of your gutter system and make sloping adjustments as necessary. Rain gutters, if well-positioned, are efficient in keeping your property from being waterlogged.
If, on the other hand, your home rain gutters are not properly positioned, it may result in pooling, which over time will damage the rain gutters. One way to find out if your gutter is properly sloped is by spraying water into it with a hose. Check to see if the water flows freely toward the downspout.
3. Inspect Seams for Leaks
Before it starts to rain, check for leaks and holes in your rain gutters. Get out your garden hose and spray water on your roofing system and carefully inspect for leaks. If you discover any leaks, you can fix them using a silicone sealant. Make sure you seal both sides of the gutter.
Seal up smaller holes fast before they escalate into a bigger problem. For more severe leaks, it is best to leave it to the professionals.
4. Rinse Thoroughly with Water
Another rain gutter maintenance tip is thorough cleaning. At the end of autumn, take a hose and with the aid of a ladder, climb to the top of the gutter and rinse it thoroughly with water. This should be done after removing leaves and debris to prevent clogging.
5. Install Gutter Guards
The most efficient way to protect your rain gutters and improve efficiency is by installing gutter guards. Gutter guards help keep leaves and debris away from your gutters and downspouts.
This one-time investment will prolong the lifespan of your gutters by preventing damage. Also, you will save more when it comes to periodic repair works. If you don’t have gutter guards installed yet, consider doing that now.
6. Replace Damaged Sections
If you notice any damage on a section of your rain gutters, do not hesitate to replace it. Leaving it unfixed may lead to costlier damage. Contact a local Toronto roofing company for quick and efficient replacement service.
7. Inspect Downspouts
Make sure to carry out a periodic check of your downspouts. If you notice any leaks or signs of wear, fix it immediately.
Proper rain gutter maintenance is the key to protecting your home. You don’t have to worry about mould growth, moisture, cracked wall damage, and other property damage.